Hanging Our Wallpaper:
Preparation before hanging:
You will need to clean, fill in any holes and sand the wall before applying our wallpapers. We recommend making sure there are no obvious dark marks on the wall before papering. Measure the height of the wall and before cutting the panels refer to the repeat pattern measurement to help match the design. When cutting your first panel add on 100 mm vertical excess to allow for variation in the height of the wall.
Installing our wallpaper:
We recommend pasting the wall first, being careful not to get this on the print side, if you do, wipe gently with a soft, dry cloth. Avoid rubbing the wallpaper with a damp cloth as it may remove inks from the print design. When applying the paper you may want to measure and mark a light pencil line as a guide. One at a time hang the paper panels top down, do not overlap the papers, carefully match the pattern design and paste the wall edge to edge, firmly press the edges together so there is an invisible join and smooth over with a clean, dry, soft cloth or smoothing tool to remove away any bubbles or ripples.
Hanging in a bathroom or a high splash area?
If you are papering an area that might easy get splashed then you will need to apply a matt decorators varnish to improve the water-resistance. We recommend Polyvine, decorators varnish suitable for wallpaper, and select dead flat clear finish.